7
6
OPERATION
Before the first use it is recommended to fill the
kettle with water to the maximum level, to boil
and to discharge water to remove all mechanical
particles and dust, which could get inside the
kettle during manufacture and transportation.
It is recommended to heat the toaster using
maximum browning level “6” without loading of
bread into the toaster.
When you switch on the toaster for the first time
you can feel a specific smell, which does not give
evidence of the toaster’s failure.
CONFIGURATION
ELECTRONIC BLOCKING
The toasting process starting lever will not fix
in the operating position if the kitchen set is
unplugged.
AUTOMATIC CENTERING OF TOASTS
The toaster automatically centers toasts for even
browning from both sides, wide slots allow to
brown toasts of different width.
BROWNING LEVEL CONTROL
The toaster is equipped with the control, which
allows to choose the necessary browning level for
different types of bread. The browning level setting
ranges from “1” to “6”. Different browning levels
correspond to different types of bread.
AUTOMATIC SYSTEM OF EMPLY KETTLE
SWITCH ON PROTECTION
The kettle is fit with a protection device to prevent
it from breaking down in case it is switched on
when containing an insufficient amount of water.
In this case the kettle will automatically switch off,
and you will hear a sound signal. It is necessary
to unplug the kettle and to wait until it cools
down. Only then you can fill the kettle with water
and switch it on again. The protection system
automatically restores its function once the kettle
cools down completely.
