BORK B 780, Instruction Manual

Page: 9 / 14

14 15
REMEDIAL MEASURES
• Upon detection of any damage immediately stop to use
the blender and bring it into the nearest BORK service center
for testing, replacement or repair.
• For safety reasons all operations on repair and maintenance
of the appliance shall be performed only by representatives
of authorized BORK service centers. For addresses and
telephones of the service centers visit the web-site www.bork.ru
or call 8 800 500 88 99.
• Never immerse the blender’s base with the motor, the power cord
or the power plug in water or any other liquid. Avoid condensate
formation thereon; do not use the appliance in areas with high
humidity.
• Avoid foreign objects of liquids penetration in the appliance base
that it can result in damage.
• Check the power cord, the power plug and the blender for
damages on a timely basis. Upon detection of any damage
immediately stop to use
• the blender and bring it into the nearest service center for testing,
replacement or repair.
• Do not remove or damage the nameplate containing information
of the appliance and its serial number. It is required for the
appliance identification in case of any failure.
• Do not use steel wool, abrasive sponges, chemicals, abrasive
cleansers, as well as any agents and tools that are able to
damage or scratch the blender.
• Do not use or store the appliance at temperature below 0 ° C
or high humidity.
• The appliance shall be transported only in original package fixed
upright.
• Dispose the appliance in accordance with the rules and
regulations in force in the country of distribution.