221
Stainless steel and aluminium parts, painted and silk- screen
printed surfaces
Clean using an appropriate product. Always dry thoroughly.
Important
These parts must be cleaned very carefully to avoid scratching and
abrasion. You are advised to use a soft cloth and neutral soap.
Caution
Do not use abrasive substances or non-neutral detergents as these will
irreparably damage the surface.
Vitroceramic cooking hob
– See page 206.
Electronic programmer display cleaning
Clean the programmer display using a soft cloth, warm water and neutral
soap, or a soft cloth with a liquid detergent (non-abrasive). When cleaning,
be careful to move the cloth in one direction only. Then wipe the display
with a damp cloth and dry it with a soft cloth.
Important
DO NOT use chlorine-based or acid-based cleaning products, abrasive
products or non-neutral detergents as they may cause irreparable
damage to the surface. DO NOT spray cleaning liquids directly on the
programmer display.
Important
The manufacturer declines all liability for possible damage caused by
the use of unsuitable products to clean the appliance.
Attention
The appliance gets very hot, mainly around the cooking areas. It is very
important that children are not left alone in the kitchen when you are
cooking.
Do not use harsh abrasive cleaners or sharp metal scrapers to clean
the oven door glass since they can scratch the surface, which may
result in shattering of the glass.
EN
User guide - Installation advice
