INSTALLATION INSTRUCTIONS
Before Using Your Wine cooler
•
Remove the exterior and interior packing.
•
Before connecting the Wine cooler to the power source, let it stand upright for approximately
2 hours. This will reduce the possibility of a malfunction in the cooling system from handling
during transportation.
•
Clean the interior surface with lukewarm water using a soft cloth.
•
When disposing your appliance, please choose an authorized disposal site.
Installation of Your Wine cooler
•
Place your Wine cooler on a floor that is strong enough to support it when it is fully loaded.
To level your Wine cooler, adjust the front leveling leg at the bottom of the Wine cooler.
•
Locate the Wine cooler away from direct sunlight and sources of heat (stove, heater, radiator,
etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical
consumption. Extreme cold ambient temperatures may also cause the unit not to perform
properly.
•
Avoid locating the unit in moist areas.
•
Plug the Wine cooler into an exclusive, properly installed-grounded wall outlet. Do not under
any circumstances cut or remove the third (ground) prong from the power cord. Any
questions concerning power and/or grounding should be directed toward a certified
electrician or an authorized Products service center.
Attention
•
Store wine in sealed bottles;
•
Do not overload the cooler;
•
Do not open the door unless necessary;
•
Do not cover shelves with aluminum foil or any other shelf material which may prevent air
circulation;
•
Should the Wine cooler be stored without use for long periods it is suggested, after a careful
cleaning, to leave the door ajar to allow air to circulate inside the cooler in order to avoid
possible formations of condensation, mold or odors.\
OPERATING YOUR WINE COOLER
AND SETTING THE TEMPERATURE CONTROL
Please use the cooler under 5-32
℃
ambient temperature, if the ambient
temperature is higher
than or lower than this temperature, it will cause the temperature fluctuation in the cooler,
3
