19
User guide
Rayplicker Cobra
When the acquisition is complete, the
transfer to the patient file is automatic.
Take care not to move for 1 second, the time
of the spectral acquisition.
Once the transfer is complete, the shade
viewer opens on the Rayplicker Vision sof-
tware.
7.2. Automatic calibration
The Rayplicker Cobra device performs a self-calibration at each acquisition.
This is done using the sterilizable tip which has a gray pattern. It is necessary to ensure the
cleanliness and condition of this calibration tip. It must also be protected from the sun’s rays
and any other type of external aggression.
The condition of the tip attests to the quality of the calibration and guarantees the quality of
the data collected by the Rayplicker Cobra.
We invite you to check the condition of your tips. To do so, please refer to the Good Practices
guide presented here
“8.1. Good practices for using the Rayplicker Cobra”, page 21,
of this
manual and on the Borea website