EN
25
Operation
www.bora.com
Increase heat retention level
X
X
Press the touch surface on the control knob a second
time for 1 second to activate heat retention level 2 (
;
).
X
X
Press the touch surface on the control knob a third
time for 1 second to activate heat retention level 3 (
*
).
Q
Q
Each time, this is confirmed by a beep and the relevant
symbol is shown on the control knob display.
Reduce heat retention level
Q
Q
After setting heat retention level 3, pressing the touch
surface (1 second) again reduces the level by 1.
Q
Q
Each time, this is confirmed by a beep and the relevant
symbol is shown on the control knob display.
Switching off heat retention level
The heat retention level activated switches off if you
X
X
select another power level
X
X
switch off the cooking zone
6.2.5 Childproofing feature
INFO
The childproofing feature can only be activated
or permanently deactivated if both knob brings
are at the 12 o’clock position and no function
is active.
Activating the childproofing feature
X
X
Press the touch surface of one of the control knob for
5 seconds.
Q
Q
An acoustic signal can be heard and the display on
the control knob switches to
L
. The display goes blank
after 10 seconds and the childproofing feature is
activated.
Permanently deactivating the childproofing
feature
X
X
Press the touch surface of one of the control knob for
5 seconds.
Q
Q
A beep can be heard and the display on the control
knob switches to
0
. The display goes blank after
10 seconds and the childproofing feature is
permanently deactivated.
Deactivating the childproofing feature for a
cooking session
X
X
Turn the knob ring from the 12 o-clock position to a
power level.
Q
Q
L
appears in the control knob display.
X
X
Press the touch surface of the control knob for
5 seconds.
Q
Q
An acoustic signal can be heard and the control knob
display shows the power level selected.
Q
Q
The childproofing feature is only deactivated for this
cooking session and you can set the power level you
want.
Q
Q
The childproofing feature is reactivated next time you
switch on.
INFO
An
A
is shown on the control knob display for
as long as the automatic heat up function is
active.
Q
Q
Once the automatic heat up period has passed, the
power is reduced to the selected continuous cooking
level.
Q
Q
If a higher continuous cooking level is selected while
the automatic heat up function is active, the new heat-
up time is automatically valid.
Switching off the automatic heat up function
The activated automatic heat up function will end
prematurely if you
X
X
reduce the power level (continuous cooking level).
X
X
set power level
9
.
X
X
activate power setting
P
.
X
X
activate heat retention level
v
.
X
X
switch off the cooktop.
6.2.4 Heat retention level
Activating the heat retention level
15°
Fig. 6.3
Knob ring setting for heat retention level
INFO
The knob ring position for the heat retention
level is between the 12 o’clock position and
the 1 o’clock position.
X
X
Turn the selector ring approximately 15° clockwise
from the 12 o’clock position until it lightly engages.
Q
Q
v
appears in the control knob display.
X
X
Press the touch surface on the control knob for 1
second to activate the heat retention level 1.
Q
Q
This is confirmed by a beep and the
,
symbol is sown
on the control knob display.
Heat retention
level
1
2
3
Symbol
.
;
*
Temperature in °C
42
74
94
Tab. 6.2 Temperatures of heat retention levels
Summary of Contents for PKIW1
Page 33: ...EN 33 Notes www bora com 11 Notes...
Page 34: ...EN 34 Notes www bora com...
Page 35: ......
