bora PKFI3 Operating And Installation Instructions Download Page 3

EN

3

General information

www.bora.com

1  General information

Data can only be read out manually via your cooktop extractor. 

This decision is therefore your responsibility. 

These saved data then enable a rapid error search and 

troubleshooting in the event of servicing.

1.5  Presentation of information

We use standard formatting, numbering, symbols, safety 

instructions, terms and abbreviations so that you can work 

quickly and safely when using this manual.

The term “appliance” is used to refer to cooktops, cooktop 

extractors or cooktops with integrated cooktop extractor.

Instructions

 are indicated with an arrow.

 

X

Always follow all instructions in the prescribed order.

Enumerations

 are indicated with a bullet point at the start of 

the line:

 

O

Enumeration 1

 

O

Enumeration 2

 

i

Information notes point to special features that must be 

taken into account.

Safety and warning instructions

The safety and warning instructions in this manual are 

emphasised with symbols and signal words.

Safety and warning instructions are structured as follows: 

 

ÿ

 WARNING SYMBOL AND SIGNAL WORD! 

Type and source of danger

Results of non-compliance

 

X

Measures to minimise risk

Please note:

 

O

warning symbols draw attention to a high risk of injury.

 

O

The signal word indicates the severity of that risk.

Warning 

symbol

Signal word Risk

ü

Danger

Indicates an immediate, hazardous 

situation which causes death or 

serious injury if not respected.

ü

Warning

Indicates a potentially hazardous 

situation which can cause death or 

serious injury if not respected.

Caution

Indicates a potentially hazardous 

situation which can cause minor 

injury or damage to property if not 

respected.

Tab. 1.1 

Meaning of the warning symbols and signal words

These instructions contain important information to protect you 

from injury and prevent damage to the appliance.

Please read these instructions carefully before installing or using 

the appliance for the first time. 

Other documents apply alongside these instructions.

Please by all means adhere to all documents that form part of 

the scope of delivery.

Assembly, installation and commissioning must always occur 

in line with national laws, regulations and standards. The work 

must be performed by qualified specialists who are familiar with 

and comply with the supplementary regulations of the local 

utility companies.

All safety and warning information as well as the handling 

instructions in the accompanying documents must be observed.

1.1  Liability

BORA Holding GmbH, BORA Vertriebs GmbH & Co KG, BORA 

APAC Pty Ltd and BORA Lüftungstechnik GmbH – hereinafter 

referred to as BORA – does not assume any liability for damage 

arising from disregard for or non-adherence to the documents 

included in the scope of delivery!

Furthermore, BORA shall not be held liable for damage caused 

by improper installation or failure to observe the safety and 

warning instructions!

1.2  Validity of the operating and 

installation instructions

These instructions apply to several appliance versions. It is 

therefore possible that some of the features described do not 

apply to your appliance. The details of the figures contained 

herein may differ from some appliance versions and are to be 

understood as schematic diagrams.

1.3  Product conformity

Directives

The appliances meet the following EU/EC directives:

2014/30/EU EMC Directive 

2014/35/EU Low Voltage Directive 

2009/125/EC Ecodesign Directive 

2011/65/EU RoHS Directive

1.4  Data protection

During operation your cooktop extractor saves pseudonymised 

data such as menu settings entered by you, operating hours 

of the individual technical units and the number of functions 

selected. Furthermore, your cooktop extractor documents errors 

in combination with the number of operating hours.

Summary of Contents for PKFI3





































Reviews: