EN
26
Operation
www.bora.com
X
X
Turn the selector ring approximately 15° clockwise
from the 12 o’clock position until it lightly engages.
Q
Q
v
appears in the control knob display.
X
X
Press the touch surface on the control knob for
1 second to activate the heat retention level 1.
Q
Q
This is confirmed by a beep and the
,
symbol is sown
on the control knob display.
Heat retention
level
1
2
3
Symbol
.
;
*
Temperature in °C
42
74
94
Tab. 6.2 Temperatures of heat retention levels
Increase heat retention level
X
X
Press the touch surface on the control knob a second
time for 1 second to activate heat retention level 2 (
;
).
X
X
Press the touch surface on the control knob a third
time for 1 second to activate heat retention level 3 (
*
).
Q
Q
Each time, this is confirmed by a beep and the relevant
symbol is shown on the control knob display.
Reduce heat retention level
Q
Q
After setting heat retention level 3, pressing the touch
surface (1 second) again reduces the level by 1.
Q
Q
Each time, this is confirmed by a beep and the relevant
symbol is shown on the control knob display.
Switching off heat retention level
The heat retention level activated switches off if you
X
X
select another power level
X
X
switch off the cooking zone
6.2.5 Childproofing feature
INFO
The childproofing feature can only be activated
or permanently deactivated if both knob brings
are at the 12 o’clock position and no function is
active.
Activating the childproofing feature
X
X
Press the touch surface of one of the control knob for
5 seconds.
Q
Q
An acoustic signal can be heard and the display on
the control knob switches to
L
. The display goes blank
after 10 seconds and the childproofing feature is
activated.
Q
Q
Repeat the process to deactivate the second heating
ring.
INFO
If the heating ring is activated when a cooking
zone is switched off, the relevant setting is
activated again the next time a power level is
selected.
6.2.3 Automatic heat up function
Switching on the automatic heat up function
X
X
Select the desired power level (continuous cooking
level). For more precise information on heating up
time, see Device description section.
X
X
Within 3 seconds of setting the power level, press the
touch surface of the control knob for at least 1 second.
Q
Q
The automatic heat up function is activated and the
control knob shows an
A
in front of the continuous
cooking level selected (e.g.
A3
).
Q
Q
The control knob display shows an
A
for as long as the
automatic heat up function is active.
Q
Q
Once the automatic heat up period has passed, the
power will be reduced to the selected continuous
cooking level.
Q
Q
If a higher continuous cooking level is selected while
the automatic heat up function is active, the new time
will automatically be valid.
Switching off the automatic heat up function
The activated automatic heat up function will end
prematurely if you
X
X
reduce the power level (continuous cooking level).
X
X
activate heat retention level
v
.
X
X
switch off the cooktop.
6.2.4 Heat retention level
Activating the heat retention level
15°
Fig. 6.3
Knob ring setting for heat retention level
INFO
The knob ring position for the heat retention level
is between the 12 o’clock position and the 1
o’clock position.
Summary of Contents for PKCH2
Page 34: ...EN 34 Notes www bora com 11 Notes...
Page 35: ......
