EN
25
Operation
www.bora.com
6 Operation
X
X
Observe all safety and warning information during
operation (see the Safety section).
INFO
The cooktop may only be operated when the
stainless steel grease filter of the cooktop
extractor is installed (see operating instructions
for cooktop extractor).
INFO
Clean the cooking zone before using the cooktop
for the first time (see the Cleaning section).
6.1 General operating instructions
The cooktop is controlled using the control knobs.
Each cooking zone has its own control knob. The front
cooking zone is controlled using the left-hand knob and
the back cooking zone with the right-hand knob.
There are 9 power levels, one hyper level and various
functions available for each cooking zone.
t
P
bzw.
o
9
8
7
6
5
4
3
2
1
v
0
Fig. 6.1
Knob ring assignment
Knob ring position
Function
0
Switching off
v
Heat retention level
1 - 9
Power levels
P
Hyper level
o
2-ring switching
t
Timer function
Tab. 6.1 Knob ring positions
6.2 Operating the cooktop
6.2.1 Switching on the cooking zone
Fig. 6.2
Switching on the cooking zone
X
X
Turn the knob ring from the 12 o-clock position to a
power level.
Adjusting the power level
X
X
Turn the knob ring to the desired power level.
INFO
The selected power level is shown in the middle 7
segment display on the control knob.
6.2.2 Switching on heating rings
1-ring cooking zone (hyper level)
INFO
The 1-ring cooking zone is equipped with a power-
enhancing hyper level.
X
X
Twist the knob ring to the 10 o’clock position.
Q
Q
The hyper level is activated and
P
is shown on the
control knob display.
Q
Q
After 10 minutes, the cooking zone is automatically
switched back to power level
9
.
Deactivating hyper level early
X
X
Turn the knob ring to the desired power level.
Q
Q
The power level set is active and is shown in the
control knob display.
2-ring cooking zone (2-ring switching)
INFO
The number of heating rings currently active is
displayed by
o
or
oo
on the control knob display.
X
X
Twist the knob ring to the 10 o’clock position.
X
X
Press the touch surface of the control knob for
1 second.
Q
Q
A beep can be heard and the second heating ring is
activated.
X
X
Within 3 seconds, twist the knob ring to the power
level you want. The cooking session will continue with
the selected stage.
Q
Q
If no power level is selected within 3 seconds, the
heating rings switched on are deactivated again and
the display reverts to what it was originally showing.
Summary of Contents for PKCH2
Page 34: ...EN 34 Notes www bora com 11 Notes...
Page 35: ......
