Booster XT 38.1, Owner'S Manual, Page: 9 / 24

9
BOOSTER DUAL SYNCRO CAM
The BOOSTER XT 38.1 is equipped with a dual ‘auto syncro’ cam
with two cam system options. The draw length adjustability ran-
ge for cam 1 is from 26.5—30.5” without a bow press, for cam 2,
the adjustability range is from 24.5”—27.5”.
To adjust draw length, loosen the fastening screw (red marking),
thereafter, remove the draw length screw (green marking) from
the module and rotate the draw module to the desired draw len-
gth hole (see page 10). Reinsert the draw length screw, snug the
screw into position and retighten the fastening screw clockwise
(do not over tighten)
. Repeat this process on the second cam
making sure both modules are set in the same draw length po-
sition.