Replace controller
Disconnect throttlewire (located in
controller box, or infront of handle bar
if the bike has waterproof quick release
connector) and see whether the ERROR
code disappears. If YES, contact service
agent
Re-connect motor wire (located
underneath chainstay at right side).
If problem remains, contact service agent
Contact service agent for analysis of rear
motor rotor
Disconnect 2 brake ever wires(locatedin
front of handle bar to see whether the
ERROR code disappears. If yes,replace
the brake lever and reconnect brake lever
wire to controller.
Fully charge the battery
Do not block motor from rotating freely
Disconnect all wires (brake lever, display,
throttle, and motor) then reconnect.
Check all connectors are in good condi-
tion and are connected properly
Current error or MOS damaged
Throttle Abnormality
Motor Abnormality
Motor Hall Abnormality
Brake Abnormality
Under voltage
Motor stalling
Communication controller
receiving error
Communication display
receiving error
1
2
3
4
5
6
7
8
9
ERROR
CODE
DEFINITION
SOUTION
If there are problems with the electronic control system,
the error code will appear automatically.
12.Troubleshooting
Summary of Contents for Scout
Page 1: ...OWNERS MANUAL ...
