BoomToneDJ Slim PAR 7 QUAD 10 v2, User Manual

Page: 11 / 14

11
A. By Master/Slave built-in program function.
By linking the units in master/slave connection, the first unit will control the other units
to give an automatic, sound activated, synchronized light show. This function is good
when you want an instant show. You have to set the first unit in Automatic, sound
activated mode. Its DMX input jack will have nothing plugged into it. The other units will
have to select
SLA , Their DMX cables plugged into the DMX input jacks (daisy chain) and
the slave led lights will constantly on.
B. By universal DMX controller
Using universal DMX controller to control the units, you have to set DMX address from 1
to 512 channel so that the units can receive DMX signal.
Press the MENU, then find Addr ,press ENTER, when the 1 is showing on the display.
Pressing ENTER . Use DOWN and UP button change the DMX512 address.
DMX Protocol :
Channel Value Function
1
Full Dimmer :
0-255 Intensity 0 to 100%
2
Red dimmer :
0-255 Intensity 0 to 100%
3
Green dimmer :
0-255 Intensity 0 to 100%
4
Blue dimmer
0-255 Intensity 0 to 100%
5
White dimmer
0-255
Intensity 0 to 100%
6 1-255
strobe
7
0-50
dimmer
51-101
FADE
102-152
JUMP
153-203
Sound1
204-255
Sound2
8
0-255
SPEEED / sound control sensitivity adjust