Bonso BS004 Instruction Manual Download Page 5

Document Number

ENG_TEL_A002 

Bonso Group

 

Rev #

 

00 

Title : BS004 APPROVAL DOCUMENTS

 

 

Application : 

FCC APPROVAL

 

Release Date : 

12 May 2005

 Page 

31 of 39

 

 

Talking and Listening :

 To communicate, all radios in your group must be set at the same channel. 

1. For maximum clarity, hold the radio 2 to 3 inches from your mouth. 

2. Press and hold 

PTT

 button and speak in a normal voice into the microphone. The TX icon 

will appear continuously on the LCD Display when transmitting. 

3.

 

To receive messages, release the 

PTT

 button. The RX icon will appear on the display when 

your radio is receiving a transmission. 

 

Call Tone :

 The BS004 can transmit a call tone for a fixed length of time. To send a call tone, press the 

PTT

 twice rapidly. The TX icon will appear during transmitting a call tone and tone can be 

heard on the speaker for confirmation. 

 

:

 The BS-004 is able to selection of call sound . To selection the call sound ; 

1. Press the    button repeatedly until the 

“ CA ”

 appears on the display.   

2. Press the  and      buttons to selection the call sound. An 

“1”

 , 

“2”

 or 

“3”

 will 

appear on the display during setting.   

3. To exit the Menu, press 

PTT

 button 

 

SCAN :

 

The BS004 can scan all of the 22 channels to observe for any activity.   

To enter the scan mode ; 

1. Press the      button for one second.  

2. Press the            button again to exit the scan mode. 

Your radio will rapidly scan each of the 22 channels and stop on any active channel. When you press 

the 

PTT

 button to transmit on an active channel, the scanning function will stop. 

To resume scanning, press and hold the            button for one second

 

Keypad Lock :

 To avoid accidentally changing the radio operation ; 

Press the          button for 2 seconds. The        icon will appear on the display. When the      is on 

the menu function the      and      button will be disabled. When locked, you will be able to 

turn the radio off and on, monitor, transmit/receive, and send a call tone.   

To unlock, press the      for 2 seconds.                                                               

 

User Interface 

To access the advanced features of the BS-004, your radio has the following menu functions: 

 

 

 

 

Mode 

CTCSS 

Off,1~38 

Channel

1~22

Summary of Contents for BS004













Reviews: