
It is not recommended to use non-designed bags or
accessories, and it is
recommended to use the appliance for only its intended use.
Do not touch the sealing strip on the top cover of the vacuum sealer to
prevent burns.
No part of the vacuum sealer, including the power cord or plug, should be
immersed in the water. The power cord and plug must be kept dry. If it is
wet during use, wear insulated gloves and unplug the power supply. Do not
use the appliance until it has dried out.
This product does not require any lubricant or lubricating oil.
Do not wipe with organic solvent.
The user must not leave while the appliance is powered on.
When the vacuum sealer is not in use for a long time, unplug the power
cord to cut off the power.
When the appliance is not in use, it is recommended to put the support
card back into the vacuum cavity and keep the cover open and unlocked.
Otherwise, the cover and the base are pressed together for a long time, the
elastic cotton will be compressed and deformed, and the elasticity will be
weakened, which will affect the sealing effect. In severe cases, the sealing
may be lax and air leakage may occur.
Avoid the following operations: Pull the power cord when carrying the
machine, pull the main power cord of the card, take the power cord as a
handle, wrap the power cord around the sharp edges of the object , grab
the power cord and pull directly, in the wire of operate the machine if the
plug is wet.
PLACEMENT PROBLEM
Warning: Do not place the vacuum sealer on metal surface when it is in use.
When using, be sure to place the vacuum sealer on a flat, stable,heat-resistant
surface. Do not use it outdoors or near water.