background image

11. Equipped with an intelligent protective chip, the appliance will stop 
       automatically after 20 minutes of continuous running. In this case, wait for 
       20 to 30 minutes before continuous use until the motor has cooled down to 
       prolong the service life of the appliance.
12. The appliance has a current limiting design, so its motor will get locked and 
       it’s current will increase when hard food ingredients are processed. When the 
       current is larger than 1.3A, the appliance will tick and the motor will pause 
       for 2 seconds, then reverse automatically for 5 seconds and finally stop 
       running (the food in the appliance can be discharged when the motor 
       reverses). In this case, the appliance can begin to run again after the ON/OFF 
       button is put on the “0” position.
13. If the appliance has current limiting protection or its motor is locked and stops 
      automatically and cannot reverse automatically, switch off the power switch 
      and put it on the “0” position, then press the “ON” button of the power switch
      to discharge the food ingredients in the appliance and finally press the “R” 
      button of the power switch for normal use of the appliance. If the motor is still 
      locked, it is suggested to remove the food ingredients in the spiral pusher 
      before continue to use the appliance. This measure can protect the motor.
14. Do not dismantle the dismountable parts of the appliance immediately after 
       use but after both the motor and the spiral pusher have stopped and the 
       power supply is disconnected.
15. Do not sterilize any accessories of the appliance with hot water with a 

       temperature higher than 80

 or a microwave oven, otherwise they may 

       heated, deformed and damaged. The materials of all parts in contact with 
       food ingredients should comply with food hygiene certification and be clean, 
       hygeian and reliable.
16. Do not put the main body into water or another liquid or flush it with water or 
      another liquid, otherwise it may be damaged.
17. Do not clean the appliance with steel wool, abrasive cleaning agents or 
      corrosive liquids (such as gasoline or acetone).
18. Put the appliance at a place unreachable to children. The appliance is not 
      intended for use or play by persons (including children) with reduced physical, 
      sensory or mental capabilities or lack of experience and knowledge.

Summary of Contents for MJ8901















Reviews: