4
BEFORE USING YOUR KETTLE
USING YOUR ELECTRIC KETTLE
If you are using the kettle for the first time, it is recommended that you should
clean your kettle before use by boiling a full kettle of water twice and then
discarding the water.
NOTE: The max capacity of kettle is 1.8QT.
NOTE: Do not fill the water over the maximum level, as water may spill out of the
spout when boiling. Ensure that the lid is firmly in place before plugging the
power outlet.
NOTE: Designed power base can be rotated by 360 degree to facilitate the plug
connecting with power outlet.
1. To fill the kettle, remove it from the power base and open the lid by pressing
Lid Release button, fill with the desired amount of water, and then close the lid.
Alternatively, the kettle may be filled through the spout. The water level should
not exceed MAX marks or sit below MIN level. Too little water will result in the
kettle switching off before the water has boiled.
3. Function
EK8903 is a kettle of using IC program to control heat up or keep warm water.
1) With power-on detecting function: when put the kettle onto the power base,
all the four indicators in the control panel turn on and one beep can be heard.
At the same time, the indicator in the kettle lights up in red, green, blue in
sequence and then turns off, and the indicators in the control panel turn off
simultaneously, together with one beep heard.
2) Different colors for indicating different temperatures: The indicator in the
kettle will illuminate in different colors under different water temperature at
any condition. 122°F(green), 158°F(blue), 176°F(purple), 194°F(light green),
212°F(red).
2. Lay the kettle on the power base and connect the plug into a power outlet.
