5
The color of the indicator lights at the water gauge change as the water
temperature rises. ( blue, green, yellow, and purple.read gradient and off).
1. No keep-warm function at 100°C
2. 104, 131, 158, 185 °F temperature settings can be switched at will.
3. After selecting a keep-warm temperature, you need to cancel the current
keep-warm temperature state before setting another keep-warm temperature
value.
5. Lift the kettle from the power base and then pour the water.
Note:
Note:
Operation mode 2 :
1. Plug in the socket
2. Directly press power button to start boiling water function.
3. Kettle starts heating until water is boiling, the water gauge indicator light is
the same as above.
KEEP WARM MODE
1. Press to select 104, 131, 158, 185 °F temperature for keep water warm,
when selecting temperature, the corresponding blue indicator light is always on.
2. Then hold button for greater than 2S, the selected temperature value blue
indicator light changes from constant on to blinking state, the corresponding
heating indicator light at the water gauge is always bright.
3. When water is heated to the set temperature value, the heating indicator is
still on for about 30 minutes, the indicator light for setting temperature is still
blinking for about 30 minutes, after about 30 minutes later, all indicator lights
are off, and the kettle stops working.
NOTE: Operate carefully when pouring the water from your kettle as boiling water
may result in scald, besides, don’t open the lid while the water in the kettle is hot.
NOTE: Always disconnect the power supply when not use.
