To Change Communication Mode
Be Careful
As mentioned in the beginning of this manual, there are two
communication modes available for this H501. The default
setting is Normal Mode, using the Air Mic. Press the Power
Switch and Volume Up button at the same time for 2 seconds
will trigger the mode switch from Normal Mode to Silent Mode.
A low high beep sounds can be heard from the earphone
together with Red/Blue flashes indicator lights 1 time to indicate
the mode has changed successfully. After completion, the user
can start to use the Bone Conduction Mic. Repeating the above
operation will switch the mode back to Normal Mode .
To know what mode is in operation, press Power Switch and
Volume Up button at the same time once. There will be a
voice/beep prompt from the earphone and Red flash indicator as:
4
1. Press Power Switch until the LED starts Blue/Red flashes
quickly to enter H501’s pairing mode.
2. Search for H501 by using your phone/music device. For more
information on how to search for a Bluetooth device, please refer
to the user guide that comes with your phone/music device.
3. Select BonSayOn H501 from the list of recognized devices.
Follow the onscreen prompts to confirm the selection. If a pairing
code is requested, enter 0000. Smartphone users do not need to
key in a pairing code.
4. Once Pairing is successful, the LED will turn to Blue flashes
slowly.
5. Do not need to pair again for a paired device, just press it on for
2 seconds and it will pair with your device automatically.
6. Two Bluetooth devices can be connected to a BonSayOn H501
at the same time. (For example, your smartphone and your pad.)
When you finish your pairing for the first device, turn off the
Bluetooth function on the first device and continue the pairing
procedure for the 2nd device. When the pairing is done on the 2nd
device, switch the Bluetooth function on of the first device again.
Mode/Prompt Voice Beep Red LED Flash
Normal Mode Air Once Once
Silent Mode Bone Twice Twice
1. For getting the enough volume to helmet headphone, the
maximum volume is higher than common Bluetooth headset.
Please be careful to adjust the volume when using a standard
earphone. It may damage your ears If the volume is too loud.
2. The strength of Bluetooth communication signal depends
on the connected device (cellphone or notebook). Place the
connected device and the product on the same side of the body
to get a good communication result. It is because the body
may block the Bluetooth signal.
