Removal of le over paper:
Turning off:
Separate cu ng unit for CDs and credit cards:
Inser t credit card:
Insert CDs:
Technical specifica ons:
Set the switch to “OFF” and unplug the power socket. Remove the shredding a achment and then you will
able to take out any scraps of paper that have become caught in the cu ng unit. The blades are very sharp
so you should proceed with extra cau on! Place the shredder a achment back on top, plug in the power
socket and turn the device on again. You will then be able to start using the device again.
Set the switch to “OFF” in order to turn the device off en rely.
This shredder is fi ed with a separate cu ng unit for CDs/DVDs and credit cards. Set the switch to FWD
and insert the CDs / DVDs into the slot behind the flap where they will be cut into 3 pieces. Keep your
face at a suitable distance from the device when inser ng CDs/DVDs since these materials are at risk of
spli ng. The shredded material is collected in a separate container which will help you dispose of the
waste in an environmentally-friendly manner.
1. Open the security door on the CD / credit card input opening.
2. Insert the card into the top center of the CD / credit card input opening. You can only cut up one credit
card at the me. Do this always ahead with the broad side into the CD / credit card input opening.
Otherwise, the magne c strip is not destroyed.
1. Insert the CD centrally from above into the CD / credit card input opening. You can only cut just one CD.
2. Do not insert your finger into the central hole of the disc when you insert it into the device, there is
danger of injury!
Cu ng ac on: Strip-Cut
Cut size: 15\65”×1063\64” (paper), 3 pieces (CD/DVD or credit card)
Cu ng capability: 8 pages DIN A4 (75g), 1 CD/DVD or credit card
Input slot width: 8.7 inches for paper
Input slot width for CDs/DVDs: 4.7 inches
Input voltage: 120 VAC,60 Hz, 1.5 A
Paper basket: 3.4 gallons
Safety level DIN 66399-2: P-1
5
