Bonsaii C149-C, Instruction Manual

Page: 6 / 12

Cu�er Oiling Instruc�ons
To ensure proper opera�on and func�on, periodic oiling of the cu�ng system is required. Failure to
oil your cu�ng system could result in reduced sheet capacity performance, excess noise, paper jams
and possibly machine failure. Oil your cu�ers every 5th or 6th �me you empty the basket, if excess
squeaking and rubbing noise is coming from the machine or if the shredders sheet capacity has
diminished. Squeeze the lubricant across the full width of the cu�ers, Push the switch to 'AUTO'
posi�on, and then insert paper to ac�vate the cu�ng system forward for 3 seconds. Then push the
switch to 'REV" posi�on to make shredder reverse for 3 seconds. Alternate between AUTO and REV at
least three �mes or un�l all paper clears the cu�ers.
No�ce
Never use flammable synthe�c oil, petroleum based or aerosol lubricants to oil your cu�ng system.
Use only a vegetable oil based lubricant in a non-aerosol container.
Delivery:
Shredder
Instruc�on manual
BASIC EXPLOITATION RULES
It is not advised to cut as many sheets as indicated as the maximum capacity of the shredder. By
exploi�ng the machine at its top capacity we significantly reduce its vitality. Therefore, to maintain a
durable and faultless work of the shredder, it is advised to place no more than 70%.of the maximum
amount of sheets to be shred at one �me indicated for each model by the producer. The maximum
amount of sheet should be used only occasionally, It is forbidden to shred more sheets than the
maximum amount of sheets to be shred at one �me indicated by the producer, It may cause the
blockage of the machine and massive engine overloading, which will diminish shredder's durability or
even damage it. Also you should not shred so� objects such as foil, paper towels, toilet paper or
fabrics. Nor paper with self-adhesive tape should be placed into the shredder. Those materials wrap
around and jam the knives.
1. Make sure shredder is plugged into power source and the MAIN SWITCH is switched on.
2. Make sure the waste bin is fully inserted into the shredder housing.
Troubleshoo�ng
Shredder will not operate
4