Elettrosega
Mito
English
g)
Use auxiliary handles supplied with the tool.
Loss of control can cause personal injury.
4)
Power tool use and care
a)
Do not overload the device. Use the appropriate
electric tool for your work.
With the appropriate
electric tool you work better and saver in the
declared range of performance.
Do not force
the power tool. Use the correct power tool for
your application.
The correct power tool will do
the job better and safer at the rate for which it was
designed.
b) Do not use the electric power tool if the switch
does not turn it on and off or is damaged.
Any
power tool that cannot be controlled with the switch
is dangerous and must be repaired.
c) Disconnect the plug from the power source
before making any adjustments, changing
accessories, or storing power tools.
Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
d) Store idle electric power tools out of the reach
of children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool.
Power tools are
dangerous in the hands of untrained users.
e) Maintain electric power tools. Check for
misalignment or binding of moving parts,
breakage of parts and any other condition that
may affect the power tools operation.
lf
damaged, the power tool repaired before use.
Many accidents are caused by poorly maintained
power tools.
f)
Keep cutting tools sharp and clean.
Properly
maintained cutting tools with sharp edges do jam
and are easier to control.
g) Maintain electric tools with care. Check if
movable parts function correctly and do not
jam, if parts are broken or damaged in that way,
that the function of the electric tool affected.
Have damaged parts repaired before using the
device. Many accidents originate from bad
maintained electric tools.
h) Use the power tool, accessories and tools etc.,
in accordance with these instructions and in
the manner intended for the particular type of
power tool, taking into account the working
conditions and the work to be performed.
Use of
the power tool for operations different from
intended could result in a hazardous situation.
5)
Service
Have your electric power tool serviced by a
qualified repair person using only original or
identical replacement parts.
This will ensure that
the safety of the power tool is maintained.
6)
Particular information
a)
This diamond chain saw is only intended for
industrial use and may only be operated by
trained personnel.
b)
Proper use extends only to the sawing of rock,
concrete and masonry.
The saw must not be
used for cutting pure metals. For the cutting of
ductile iron pipes special chains are available in the
specialist trade
c) For operation the relevant regulations must be
observed
d) Power tools must regularly (approx. 6 months)
be checked on safety by a specialist according
to BGV A3.
e) Never deposit the chain saw until the chain has
come to a complete stop.
The rotating chain can
get into contact with the surface whereby you may
loose control of the chain saw
.
f)
Do not operate the chain saw while you carry it.
Your clothes can be captured by accidental contact
with the diamond chain.i
g)
f a disc saw is used for cutting, care must be taken
that the thickness of the cutting blade matches to
the diamond chain. Never use a disc
saw with a
conventional cutting disc for cutting. The narrow
saw groove produced in this case leads to a
jamming of the diamond chain and can lead to
dangerous kickback.
2
2
)
)
S
S
a
a
f
f
e
e
t
t
y
y
r
r
u
u
l
l
e
e
s
s
f
f
o
o
r
r
y
y
o
o
u
u
r
r
c
c
h
h
a
a
i
i
n
n
s
s
a
a
w
w
2.1) Earth (Ground)
a)
the metallic parts of your chainsaw earthed.
Make
sure that the power supply is properly earthed.
b)
make sure that the socket, extension cords and
multiple sockets you use, have the earth
connection.
Warning:
for your safety, it is important
that the whole system (electrical system,
extension cords, sockets etc.) is connected
to the earth. If you are not sure, ask a
qualified electrician for a check.
2.2) Water supply: Safety rules
a)
Connect the frequency converter FU6U via the
plug-in nipple (25) to the water supply. The ball
valve must at any time be on the side of the water
supply. Now connect the FU6U with the chain
saw via a water hose with a length of approx. 4,2
m (length of the cable).
b)
Attention: water pressure max. 3 bar. Water
may only be connected to ball valve, as
otherwise a damage on the casing may
appear by upcoming water pressure.
c) Please use a GARDENA coupling as the
connecting piece to the machine and the frequency
converter. This can be obtained from a garden
center or builders’ merchant made of plastics. A
water coupling of brass of high quality can be
received directly from Bonomi.
d) Use only clean water, as dirty water will
considerably disturb the heat exchange on the
cooling surface and thereby the motor can be
totally damaged.
Else the seals wear out very quickly.
2.3) Checks and precautions to avoid structural
damage and damage to a building
a)
Before operating, talk to the construction manager
or the planner in order to make sure that cutting
doesn’t:
b)
damage the structure of the building and change
the structural characteristics of the construction;
c)
damage any water or gas pipeline or any electric
mains.
d)
Particularly care if presence of gas pipeline, cutting
iron sparks is present and can be a comburent for
the gas
2.4) Checks and precautions to avoid damage caused
by the fall of the cut out work piece
a) before operating, make sure that the possible falling
of the cut out work piece doesn't make any
damage. In any case, secure the area where the
work piece can fall and signal the danger;
