STEP 3
CODE
M6X45
C
12
M6X18
E
12
F
2
G
10
K
2
HARDWARE
QTY
K
Assembly method: Firstly, connect connecting bar (7) with column. M6x18 jam
nut (E) is inserted from screw hole on the connecting bar. M6x45 screw (C) is
screwed in and fixed from the screw hole on the column with Curve washer (G).
Then fix assembled bed plate of step 2 on the column. The fixing way of front bed
plate is the same as that of connecting bar. The fixing way of rear bed plate can
refer to the square marks on the figure. When assembling the bottom screw hole,
it should add Wall Connector (K). M6x18 jam nut (E) is inserted from screw hole
on the bed bar. Assemble Wall Connector (K) on the outside column. M6x45
screw (C) is screwed in and fixed from Wall Connector (K) with flat washer (F).
NOTE: If you need to increase the stability of the bedstead, you can fix the
bedstead on the wall with Wall Connector (K). And you need to buy two expansion
screws by yourself.
Assemble bed plate, connecting bar(7) and assembled bed frame side together
