background image

IMPORTANT RECOMMENDATIONS

 

The installation should be entrusted to approved contractors and 

comply with all current regulations.

 

Before locating the unit ensure that the air circulation and volume 

are sufficient to allow normal cooling of the condenser and 
compressor.

 

Avoid installing the cabinet near major sources of heat or in direct 

sunlight.

 

Note that too high an ambient operating temperature can reduce 

performance

 

When connecting electrically earth continuity must be maintained 

between the unit and the supply socket.

 

The supply cable that is fitted is a specific part and should only be 

replaced with an original part. Ensure that the plug is easily accessible 
as a means of electrical isolation.

 

Protection against electrical overload or faults is the responsibility of 

the installer. Ensure that a circuit breaker or fuses are fitted in the 
supply circuit (See data plate).

 

All operations on the electrical or refrigeration circuits, including 

cleaning should only be undertaken with the unit DISCONNECTED 
(unplugged)

 

The air cooled compressor condenser must be cleaned regularly 

(Every 3 to 6 months).

 

The unit should not be sprayed or splashed with water:

. Do not use a jet wash on the exterior or technical parts of the
unit.
. The equipment must not be installed in the fresh air or exposed
to the elements.

 

Correct functioning depends on the factory fitted safety systems being 

respected. No responsibility can be accepted for malfunctions that 
result from modifications undertaken on our equipment.

 

The manufacturer can not be held responsible so the equipment be 

used for anything other than the purpose it was designed for.

A L L   S P E C I F I C AT I O N S   A N D  C H A R A C T E R I ST I C S  I N   T H I S

MANUAL MAY BE SUBJ ECT TO CHANGE WITHOUT NOTICE

Summary of Contents for SR 1200GR900













Reviews: