Bonnet A 021 H 10, Operating Instructions Manual

Page: 4 / 27

INO 45 DISHWASHER Code NU271701-03/00
Chap. 2 – Page 1
INSTALLATION – INSTALLATION – INSTALLATION – INSTALLATION
For the nature and position of connections, refer to “ Technical characteristics ” at the beginning of these instructions.
* GENERAL REQUIREMENTS
The installation, modification or repair of this dishwasher should be undertaken by an approved specialist to
current standards.
* HANDLING
Handling should be undertaken using a suitable lifting device, such as a pump truck.
If the dishwasher has to be moved, it should be left on its original pallet and it should not be stacked.
If the machine must be moved especially in the absence of its original pallet, it must be carried and not dragged.
* UNPACKING
- Remove the pallet by unscrewing the two 10mm
Æ
bolts.
- Release the cable and hoses from the rear of the
machine.
- Fit the 4 adjustable feet (they are in a bag inside the
dishwasher).
- Fit the adjustable feet to the stand legs.
- Fit the machine onto stand and secure it with the 4 bolts
supplied.
NOTE : Level the machine using the adjustable feet.
* Dishwasher without raising element
* Dishwasher with raising element