Bonnet Neve MULTIFREZE, Installation Instructions Manual

Page: 6 / 13

-7-
INSTALLATION
Take out packaging and clean all the cabinet using warm water together with 5% of neutral soap then
dry it with a soft cloth; for the glass parts only use specific products, avoiding the use of water which
can leave on the glasses limestone residues.
Keep a distance from the wall of 10 cm. at least.
Cabinet must be installed on a perfectly even surface (please settle the adjustable feet), far away from
any heat source (radiators, stoves, etc) including sun rays.
Good running of the cabinet can be
compromised in cases where the airflow is
disturbed (wind, ventilators, air conditioning
outlets, etc). Smooth running of the cabinet
is assisted when sufficient air is permitted to
flow through the bottom of the unit; it is very
important that the grills at the base are kept
uncovered.Do not expose the cabinet to rain.
Install and position the unit in such a way so
as to allow easy access to the power socket.
Never use electrical equipment in the
refrigerated compartment
Never place containers of liquid on or
immediately above the ticket counter; should
the content spill out, it would damage the
counter.
THE REFRIGERATOR IS NOT SUITABLE FOR WORKING IN DANGEROUS ENVI-
RONMENT WITH RISK OF FIRE, EXPLOSIONS OR RADIATIONS.
Operation is regular with ambient temperature indicated on technical data plate (in the tank).
PUTTING INTO OPERATION
Check that the voltage on the iden -
tification plate is the same as that of
the network.
THE ELECTRICAL SUPPLY LINE TO
WHICH THE REFRIGERATOR WILL
HAVE TO BE CONNECTED IS TO BE
PROTECTED BY A VERY SENSITIVE DIF-
FERENTIAL SWITCH (Rc=16A,Dc=30mA);
IT IS ALSO TO BE LINKED TO THE GE-
NERAL EARTHING PLANT.
The manufacturer disclaims all responsability for
any damage to people or things due to incorrect
observance of this rule. Earthing is necessary
and compulsory by law.
Do not use any multiple jack
.
After plugging, wait till the appliance reaches the right temperature before filling it: don’ t place it over
the max. load level because the temperature for good preservation is insufficient.