background image

 

 

AHD 12XX / AHD 11XX PC Panels / Displays 

General Information 

 

 

V6

 

 

 

1  General Information 

 

1.1  About these Installation Instructions 

Read these installation instructions carefully before beginning 
any work! It is a part of the Operation Manual for panel PCs / 
displays of the AHD 12XX G / AHD 11XX G / AHD 12XX F/ AHD 
11XX F series, and it is only valid for use with the operation 
manuals with the above listed devices. 

When handing the product over to third parties, these installa-
tion instructions must be included.  

These installation instructions are a part of the corresponding  
operation manual. They contain important information about the 
proper installation procedures for Panel PCs / Displays AHD 12XX 
G / AHD 11XX G / AHD 12XX / AHD 11XX F. 

  

Adhering to all product safety and handling instructions for the 
product and all connected components is a prerequisite for safe 
operation. 

In addition, the local accident prevention and general safety rules 
for the device’s area of operation must be observed.  

The illustrations in this manual are intended to demonstrate the 
contents more clearly. They are not necessarily drawn to scale and 
can vary from the actual product in minor details. 

 

 

 

1.2  Explanation of Symbols 

   

Warnings 

In this manual, warnings are marked by symbols. The warnings are 
introduced by signal words indicating the degree of danger.  

 

It is important to heed these warnings and act with caution to 
avoid accidents, personal injury and property damage! 

 

       

 

DANGER

… indicates an imminently hazardous situation that 

can result in death or severe injury, if not 
avoided.  

 

 

WARNING

… indicates a potentially hazardous situation which 

can result in death or severe injury, if not 
avoided.  

 

 

Summary of Contents for AHD 1115 Series





























Reviews: