Accessing data via PROFINET
30
Operating manual for PROFINET fieldbus | DOC01725815-0003 | 2016-12 | V2.04 EN
4.3 Non-cyclic data access / parameters
IMPORTANT INFORMATION
Only parameters with an access level of 2 or less can be accessed (see list of parameters in
operating manual).
Access for both reading and writing is possible.
IMPORTANT INFORMATION
You will find detailed information about the parameters in the "Parameters" chapter of the "DGM
drive controller" operating manual.
4.3.1
Non-cyclic data
PROFINET principally has a slot and an address when accessing non-cyclical data. Both are 8 bit
values.
The index covers the number range from 0
– 255.
The slot supports the values 0, 1 and 2.
The addressing of the non-cyclical data can be carried out in 2 different ways.
Summary of Contents for Profinet DGM Series
Page 1: ...PROFINET fieldbus Operating manual...
Page 16: ......
