BONETTI 210001, Manual, Page: 6 / 24

Foreword
Thank you for buying our product. We hope that you will enjoy of the product. Please read the whole instructions carefully.
Delivery – LED solar ball lamp consisting of:
ON/OFF
• cube light
• solar Panel
• board with 4 LEDs
• earth spike
• hook
• bracket
Bottom of the cap
• operating instructions
• 1 x INR18650 1800mAh
battery (rechargeable)
holder
cube light
with integrated solar
panel and LEDs
earth spike
Select color mode
On off
switch
Use and storage of the instruction manual
Please read the instructions carefully and thoroughly. Do not throw away the instructions. If you pass the article to somebody,
make sure that the person also gets this instruction manual.
Intended Use
The article is a decorative item. It is not suitable for illumination of a household room. The products intended for private – not
for commercial use. The item must not be used for purposes other than the purpose described in this manual, as this may
cause damage to the product or could injury a persons. For damages incurred as a result of improper use, no liability is
assumed. Further instructions and explanations are in the following text.
Safety
Warning
- A damaged or leaking item must not be used under any circumstances. It may not be put in water or other liquids.
- The product is not a toy and therefore should not be available to children. The cleaning and maintenance must not be carried
out by children.
- Do not look directly ionto the light of the Solar Garden Ball for a long time. This could be harmful to your eyes.
- The use of accessories and equipment parts that are not specifically recommended by the manufacturer may cause damage
and voids the warranty.
- Use only a fully assembled product.
- Keep the product away from heat, such as radiators, stoves and other heat-generating equipment.
Also avoid dust and sharp edges.
- Do not stick anything on the article and do not cover it.
- Do not place candles or other objects with fire on the product. Do not place objects filled with liquids, such as coffee mugs,
on the article.
- Read the additional notes in the chapters cleaning and storage of this manual.
Note
- The lamps use light-emitting diodes with an long lifespan. The lamps can not be changed.
Manual
10
Symbol explanation
Symbol Description Explanation
CE mark
This article complies with the applicable requirements set out in the Community
harmonization legislation on their attachment in accordance with EU Regulation
765/2008.
Disposal symbol for
electrical appliances
Old appliances must not be disposed of with household waste!
If the device can no longer be used, every consumer is legally obliged to dispose
of old devices separately from household waste. You have to deliver the item to
a specific disposal area in your community. This is to ensure that old equipment
will be disposed professionally. Bad environmental effects are avoided. For this
reason, electrical appliances are marked with this symbol.
Disposal Symbol for
Batteries
Every consumer is legally obliged to hand over batteries and accumulators
to a collection point in his community or in commerce. This is independent of
contained pollutants *. In this way, batteries can be disposed in an environmentally
friendly way. Please dispose batteries only in discharged condition!
* Cd = cadmium, HG = mercury, PB = lead
Symbol BellandDual
(packaging recycling)
The legal fees for waste recycling have already been paid in advance by the
manufacturer. In this way, the disposal of the packaging will be paid by the
consumer (dual system).
Protection class 3
The luminaires contained are based on the protection against electric shock on
the application of safety extra-low voltage (SELV). No voltages higher than SELV
are generated.
Specification of the
degree of protection
Dustproof and protected against temporary submersion up to 1 meter depth for
30 minutes..
Symbol for observing the
manual
Please read the instructions in the manual before putting the article into operation.
General warning sign
Warning against a hazard or for detecting danger in the context of accident
prevention regulations.
Batteries
1. Caution - risk of explosion in case of improper replacement of the batteries.
2. Replace only with the same or equivalent type of battery (rechargeable batteries).
3. Batteries may not be exposed to excessive heat or the like as fire. The batteries could explode.
4. Always use the correct battery size and the correct battery type.
5. Change all batteries of a set at the same time.
6. Before inserting the batteries clean the battery contacts and the contacts in the product.
7. Ensure that the batteries are inserted correctly. Make sure the polarity ( + and - ) is correct.
8. Remove exhausted batteries from the product and dispose them in a designated recyclingcontainer.
Removal of batteries
1. If the batteries are exhausted and can no longer be charged, replace them with an equivalent type of battery.
2. Unscrew the 6 screws.
3. Take out the battery cover.
4. Take out the battery waterproof silicone gasket.
5. Remove the batteries from the holder and dispose it properly.
Use only batteries of the same type and take care of the correct polarity.
6. Screw up the article again. Make sure that all bolts are tight.
7. Important!
Make sure that the cap is securely screwed so that no moisture can penetrate into the article.
11