Boneco P700, Instructions For Use Manual

Page: 25 / 40

25
en
CLEANING AND MAINTENANCE
INFORMATION ABOUT CLEANING
The BONECO P700 is designed for maintenance-free op-
eration. A damp towel and hot water with a little bit of
dishwashing detergent is sufficient for cleaning.
It is best to clean the appliance during a filter change
(see page 19).
Always unplug the BONECO P700 before you start
cleaning it! Failure to do so can result in electric
shock and fatal injury!
The pre-filter and the cover have to be completely
dry before they can be inserted, otherwise the filter
can be damaged.
Do not use alcohol or corrosive cleaning agents for
cleaning.
CLEANING
1. Push down the closing mechanisms and remove the
cover with the pre-filter.
2. Lift the pre-filter by the tabs to separate it from the
cover.
3. Wash the pre-filter in hot running water and allow it
to dry completely.
4. Secure the pre-filter using the cut-outs in the cover.
5. Put the cover back on the appliance.
6. Repeat the cleaning with the second pre-filter.