Installation manual Bondtech DDG Ultimaker V2.0
General usage advice
While testing the upgrade we got great printing results by setting the tension halfway
of the scale. Due to the difference between materials you may want to adjust the
tension of the spring. Flexible filament for example does not need as much tension.
Filament loading gets even easier with this upgrade. Insert the filament and wait until
the filament is gripped by the Bondtech Dual Drive system. Confirm and you are
done. The Bondtech Dual Drive system will automatically guide the filament into the
PTFE tube.
If you want to push or pull the filament out of the PTFE tubing you can pull the lever
up to release the firm grip of the Bondtech Dual Drive system. Releasing the grip will
allow you to move the filament through the tube by hand.
Good luck with your Bondtech feeder!
If you have any questions please first read the FAQ
(
http://www.bondtech.se/en/faq/
). If the question still hasn’t been answered feel free
to contact us by email or telephone.
Repslagarvägen 3
33153 Värnamo
Sweden
e-mail:
phone: +46702220193
paypal: [email protected]@bondtech.se
web:
VAT-registration number: SE556995564301
Christopher Matthes
Twitter:
https://twitter.com/cj_matthes
