The In-Line wrist strap, mat and Earth Constant Monitor is designed to continuously
monitor whether the wrist strap, bench mat or the Earth is disconnected whilst
simultaneously checking the Earth to ground system is working correctly.
Should any part of the ESD system fail a red LED indicator will illuminate and a buzzer
sound. That part of the system should be checked using the appropriate test equipment
before continuing with manufacture.
Common Features of the CM8300C and CM8300R
Constant monitoring of the Earth to ground connection.
Constant monitoring of the work mat to Earth connection.
Constant monitoring of the wrist strap connection.
Features of the CM8300C
Wrist strap body mass adjustment for individual user set up.
Features of the CM8300R
Automatically enters standby mode when wrist strap cord is removed.
Indicates ‘high’ or ‘low’ fail for the users wrist strap.
The information contained within this spec sheet is for guidance only. We make no warranties expressed or implied and
assume no liability regarding any use of this information.
Connect
to resistor free
ESD bonding
point
Connect to
master ground
point
Connect to
your bench top
matting
12v
power
supply
The supplied connection kit allows you multiple ways
to install your constant monitor.
The ground and Earth connections must be on
separate systems to ensure proper monitoring.
Installing your constant monitor
CM8300C and CM830R constant monitor
