Bond HYUTT10001-4 Owner'S Manual Download Page 2

Bond Manufacturing Company  |  Page 2

WARNING

Before you assemble or operate this unit, please carefully read this entire manual. Failure to do so 
may result in a fire, explosion, injury or death. 

SAFETY INFORMATION

•  Do not use this firebowl for cooking.
•  Do not burn any other materials than are supplied with and intended for use in this firebowl.
•  Do not pour water into firebowl.
•  The installation of this product must conform with local codes or, in the absence of local codes, 
with either the National Fuel Gas Code, ANSIZ223.1/NFPA 54, or CAN/CGA-B149.1, National Gas and 
Propane Installation Code. *Do not use this firebowl if any part has been under water.
•  Do not store a spare or disconnected propane cylinder under or near this firebowl.
•  After a period of storage, and/or non use, the propane firebowl should be checked for gas leaks and 
burner obstructions before use.
•  Do not operate the propane firebowl if there is a gas leak present.
•  Never use a flame to check for gas leaks.
•  Combustible materials should never be within 48 inches of the top, back or sides of your propane 
firebowl.
•  Do not put any other firebowl cover or anything flammable on, or beneath the firebowl.
•  The propane firebowl should never be used by children. Children must be supervised when they are 
anywhere near the appliance.
•  Users should be alerted to the hazards of high surface temperatures and keep a safe distance to 
avoid burning or clothing ignition.
•  Pay attention when operating the firebowl. It is hot when in use and should never be left unattended. 
Do not transport it while in operation.
•  Should fire go out while burning, turn the gas valve off. Wait five minutes before attempting to relight, 
then follow instructions to light the firebowl.
•  Never use charcoal or any other solid fuel in the firebowl. Never place clothing or other flammable 
materials on or near the firebowl.
•  Never lean over the open firebowl or place hands or fingers on the upper portion of an operational 
unit.
•  Keep ventilation openings in cylinder enclosure (FIREBOWL BODY) free and clear of debris.
•  Do not rest feet on the firebowl.
•  Do not enlarge valve orifices or burner ports when cleaning the valve or burner.
•  Propane gas is not natural gas. Only use propane for this firebowl.
•  The conversion or attempted use of natural gas in a propane unit.
•  Do not use this firebowl on vehicles or boats. Always operate the appliance on flat ground outdoors.
•  Keep any electrical supply cord and the fuel supply hose away from any heated surfaces.
•  Do not use this firebowl unless all parts are in place.
•  Inspect the burner before each use of the appliance. If there is evidence of damage, the burner must 
be replaced prior to the appliance being put into operation. Use Manufacturer approved or supplied 
replacement burner only.
•  FOR PROPANE GAS UNITS: The gas pressure regulator provide with the propane fire bowl must be 
used.
•  Do not attempt to disconnect the gas regulator or any gas fitting while your firebowl is in operation.
•  A dented or rusty  propane cylinder may be hazardous and should be checked by your gas supplier 
prior to use.
•  Do not use a  propane cylinder with a damaged valve and any other worn out parts.

Summary of Contents for HYUTT10001-4











Reviews: