Step 5: Assemble panel D to panel A, B
Step 6: Assemble panel E to panel B
using 5pcs M5 x 10 screws.
using 2pcs M6 x 30 screws.
Step 7: Put a 20 lb. liquid propane
Step 8: Turn the wing screw (M8X30) on the
gas (LP) tank (not included) in the
outer part of metal stand clockwise to
metal stand. Make sure the gas tank
secure the gas tank tightly.
sits on the metal stand completely.
Step 9: Put the regulator inside the
Step 10: Connect the regulator to gas tank.
Tank Hideaway
TM
, and the hose through the
hole at the bottom of the Tank Hideaway
TM
.
Patent Pending
**WARNING**
1700 West 4
th
Street, Antioch, CA 94509
1-866-771-BOND(2663) OR TO BETTER
EXPEDITE YOUR REQUEST FEEL FREE TO EMAIL US
OR VISIT OUR WEBSITE UNDER CUSTOMER SERVICE SUPPORT
www.bondmfg.com
BOND MANUFACTURING CO.
Open Tank Hideaway
TM
cover to connect or disconnect your regulator and to open/close the tank valve.
Make sure the hose is not pressed underneath the Tank Hideaway
TM
.
IF YOU HAVE QUESTIONS OR CONCERNS
PLEASE CALL BOND TOLL FREE #
2
