6
Step 2 –Attach Head Assembly
to Post
Screw off 4pcs bolts which
preassembling on the head
assembly. Please see
Figure
3.
Load head assembly by
inserting gas hose into post.
Please see
Figure 4
Connect the hose and
regulator with spanner
see
and Figure 5
Insert head assembly into
post. Tighten securely using
bolts (4pcs). Please see
Figure 6
Step 3 –Attach
Reflector Stud to
Head Assembly
Attach reflector stud (3pcs)
and flat washers (3pcs) to the
top of head assembly and
tighten the bolts securely
Please see
Figure 7
.
Figure 3
4 pcs
bolts
Figure 4 Figure 5
Figure 2-1
Assemble the cap to the post.
post
Cap
Figure 6 Figure 7
