TIPS:
Before Beginning
●
Read the instructions thoroughly.
●
For future reference, save this owner's manual.
※
Keep your firebowl free and clear from combustible materials.
※
Visually inspect burner from obstructions, keep tank enclosure free and clear from debris.
※
After the burner and lava rocks are completely cooled down, use a soft brush to get rid of the mild stains,
loose dirt and soil. Wipe with a soft cloth.
STUBBORN STAINS
TO EXTINGUISH
STEP 4. LEAK TEST
Perform leak test in a well ventilated area outside and where no source of spark can occur.
Connect cylinder to regulator. Turn the on/off valve at the unit to the ‘off’ position to pressurize the control system.
Use a soapy water solution to check all the connections leaks before attempting to light the appliance.
If a leak is
found or you smell gas, disconnect cylinder and turn valve off and do not use the appliance until repairs can be
made.
●
Check and make sure that all parts are present.
TO LIGHT
Before each use, inspect all parts.
*After assembling the gas tank, push and turn the Control Knob counter-clockwise, then use a match or a
lighter to light the fireblow. To adjust the flame, turn the Control Knob. Push and turn the Control Knob
clockwise to turn the flame off.
※
Push the Control Knob and turn clockwise to the "OFF" position.
※
Disconnect propane cylinder to close the gas supply if not for use in a long time.
ROUTINE CARE
※
Be careful not let any powder or solvent come in contact with painted or plastic components as damage may
occur.
※
Stubborn stains,discoloration and possibly rust pitting can occur from exposure to
harsh outdoor conditions
。
7
