13
Grounding Wire
1
ASSEMBLY INSTRUCTIONS
* Please keep these owner's manual for future reference.
*If you have opened the carton and removed all packages, please disregard the STEP 1 and 2. See the STEP
3 directly.
STEP 1.(1)
Open the carton and turn it upside down, make sure
the 4 pieces of the carton being open up as below Figure
STEP 1.
(2)
Lift off the carton carefully and be wary of the accessories
inside falling away. Take away the box containing lava rocks.
(3)
Take all the packing materials away except for the polyfoam
rounding the top of the firebowl.
See Figure STEP 1.
STEP 2. (1)
Turn the firebowl heads up on a flat ground.
(2)
Cut off the binding tape on the polyfoam and remove all the
polyfoam rounding the top of the firebowl.
(3)
Cut off the tie fastened to the regulator at the metal stand and set
it free for installation to Propane Tank.
See Figure STEP 2.
STEP 3.
(I) Check each part before using the product. Make sure the gas
supply system is turned "OFF"
before assembling.
See Figure I.
(II) Open the storing door on the firebowl for the gas tank.
See Figure I.
(III) Put the gas tank in the metal stand. Make sure the gas tank
sits on the metal stand completely. Turn the wing screw on the
outer part of metal stand clockwise to secure the gas tank
tightly.
See Figure VI.
connecting and operating conditions. (IV) Locate the
battery, remove the plastic cover first. Unscrew the rubber cap
of the Electric Ignitor, place a AAA battery into the battery
case. Make sure the positive pole ("+") towards the cap. Screw
the cap back to the battery case tightly.
See Figure II.
(V)
Place the lava rocks averagely in the fire bowl on the top of
the firebowl.
See Figure III.
STEP1
STEP2
6
