WARNING:
** DO NOT COVER THE IGNITION
SCREEN when placing the lava rocks
into the fire bowl. Always keep Ignition
Screen visible. This screen must be
clear and free of obstructions at all
times to insure proper operation.
The burner of the firebowl must be covered
by lava rocks completely. Otherwise the
flame may be extinguished occasionally.
See the Figure CORRECT and
INCORRECT for reference.
LP (Liquid Propane) gas supply connection
____________
Always confirm that the burner control knob is in the OFF position before connecting the
gas supply.
Do not obstruct the flow of combustion air and ventilation air to the
appliance.
To Connect:
Ensure that there is no debris caught in the head of gas cylinder,
head of the regulator valve.
Insert the nipple of the valve coupling into the cylinder valve and
tighten the black coupling nut by turning it clockwise with one hand
while holding the regulator with the other hand. (See diagram.)
Hand tighten only.
To Disconnect:
Always confirm that the cylinder valve is in the
OFF position before disconnecting the gas supply.
Hold the regulator with the one hand and loosen
the black coupling nut by turning it counter-
clockwise with the other hand. (See diagram.)
IMPORTANT
Disconnect the propane cylinder from the regulator valve when the appliance is not in
use.
SELECTING A LOCATION
_________________________
Always place this outdoor appliance on a hard, level
non-combustible surface such a concrete, rock or stone.
Minimum Clearance from Unit to Combustible Materials
72”(182.9cm) from the top; 48” (121.9 cm) from all
sides and back. Do not locate this appliance under any
overhead enclosure. Position the appliance so that you
have easy access to the control knob.
CORRECT INCORRECT
10
