I
NSTALLATION
I
NSTRUCTIONS
9
Unit Installation
3.2.3.
To fit the electrical supply cable utilise the 7/8” hole in the panel. For electrical
connections, use a Listed, liquid tight, nonmetallic flexible conduit connector, of suitable
size for the panel conduit opening, and suitable for outdoor use. Secure the connector to
the panel with locking nut. See image below for hole location.
3.2.4.
Remove the 3 screws from the control box to access the fan motor and pump
wiring harness to allow connection of the wiring.
3.2.5.
Connect the wiring as shown in the diagram below.
WARNING:- Electrical connections should be performed by a qualified electrician so
that all electrical wiring conforms to local standards.
Control
box
Screw
