Bona FlexiSand DCS
®
Buffer Manual
12
Bona.com
800.872.5515
If the machine becomes difficult to handle, release the start handles and the machine will stop immediately.
When you begin, find a balanced position on the machine and use small up and down motions. Lifting the handle will move the machine
to the right, lowering the handle will move the machine to the left.
If you have not operated a Bona FlexiSand DCS
®
Buffer previously, ensure that no
one or nothing is nearby before you start the machine.
1)
Press in the button located on the top of the handle.
3)
Press one of the buttons to activate the switch lock.
2)
Lower the handle shaft to a comfortable working position
(approximately waist-high). The shaft must be lowered at least
10˚ or the machine will not start.
4)
Press the start handle, then release the switch lock button.
Starting the machine
Remember to connect the machine to a Bona DCS
®
or other suitable vacuum system before starting work.
Handling (Cont.)
