17
Starting the Machine
Become familiar with the machine and read all instructions &
safety notices. Ensure that all operators read this manual.
Using the FlexiSand
1)
Lower the handles to a comfortable working position by pressing
the button located on the top of the handle.
If the machine becomes difficult to handle, release the start
handles and the machine will stop immediately.
Remember to connect the machine to a Bona
®
DCS
™
or other suitable
vacuum system before starting work.
3)
Press the start handle. Once the start handle is pressed down the
switch lock button can be released.
3)
Press and hold one of the buttons
(A)
to activate the
switch lock.
If you have not operated a Bona
®
FlexiSand previously, ensure that no one or nothing is
nearby before you start the machine.
2)
The shaft must be lowered at least 10˚ or the machine will not
start.
