3
II. Technology Parameter
Control Channels: 8 DMX Channels
Beam
Angel:
40
°
Control Mode: AUTO, Master/Slave, DMX512, Sound Active
Working Environment: Indoor, -20
℃
-40
℃
Mixing Color: RGBW mixing color
IP
Grade:
IP20
Power Supply: AC 100-240V/50-60Hz
LED Unites: 7PCS×12W (RGBW 4in1)
Power consumption: 60W
Packing size: 22.5
×
10
×
23.5CM
N/W: 1.8KG(1pc/CTN) G/W: 2KG(1pc/CTN) 24Kg(12pcs/CTN)
III. Connection of power/wire/signal
The exclusive plug should be used between the connection of light and power. Pls check if the rated voltage and
frequency is in accordance with the power supply. In order to make sure the power cable work in the safety
environment. If found the power cable is overheat, please cut off the power and reduce the parallel connection quantity
of lights, The light power supply is AC100~AC240V/50~60Hz
Make sure installation position is steady before fix the light. Professional clamp should be used when the light is
reverse hanging, and drive the clamp into the screw hole which in the bracket of the light. Make sure the light will not
fall from the truss, use the safety cable go through the truss and bracket of the light as a supporting, to avoid the light to
fall down. There is no entrance to the work area during mounting. Periodically to check if the safety cable has fretted
away or clamp is loosen. We will not take any responsibility which caused by the lighting fall of unsteady hanging.
Warning:
It is prohibited to move the light by handle the clamp, please move the light by handle
IV. Features:
There are 4 buttons and 4 bit digital LED on the panel, you can choose diffirent working mode via press the
buttons, and it will be display one the digital led
The speed of fan running is automatical controlled by temperature, higher temperature, then higher speed of fan
running.
when the temperature is higher than 80
，
the light will be off, until the temperature is lower than 60 , the light
will be on again.
V. Operation
Information remaind: When power on, the dot of digital led will be on, when input DMX signal, the dot will
shinning.
DMX address code setting: Press key of MENU, when the digital led dispay d001~d512, then press UP or
DOWN, you can set the address code, The code from 001~512.
IP code setting: Press Key of MENU, when the degital LED display IP.01~IP.64, then press UP or DOWN, you
can set the IP code. The code from 01~64.
Internal program running:
There are 5 kinds of internal program for choosing. Press Key of MENU, you can choose A1~A5 internal mode, A1 for
static color mode, A2 for LED jump function, A3 for LED rainbow function, A4 for LED sound active function, A5 for
LED strobe function
