BON ELECTRONICS FM-073SC, User Manual, Page: 5 / 40

Front
1,2) SDI, HDMI Input Selection
3) Analog Input Selection
Switch input in the order of : YPbPr(Component), CVBS1, CVBS2,
CVBS3(Composites)
4) Marker On/Off
5) Zoom
Switch zoom mode in the order of : Pixel to Pixel, User Zoom, DSLR Zoom
Pixel to Pixel
Shows the original picture with 1:1 pixel mapping. If the picture is larger than the
monitor’s LCD resolution, the center part of the picture is shown. Use knob to see
a different part of the picture. 5 parts are selectable : CENTER, TOP-LEFT, TOP-
RIGHT, BOTTOM-LEFT, BOTTOM-RIGHT.
User Zoom
This is a custom zoom mode which user can set the zoom level. Turn the knob to
set your own zoom level in this mode.
5