Bomford Turner WREN 2.7, Instruction Book & Replacement Parts Listing

Page: 24 / 45

1870 0902
FLAIL TRIMMER
OPERATION INFORMATION
The vehicle driver should be conversant with all tractor controls and capabilities.
It is always advisable for the tractor driver to practice the controls and operations of the Flail Trimmer prior to
setting off into work.
The speed of operation of Trimming will depend on the size, quality and type of growth to be cut. A slow
speed to suit the conditions should be selected, ensuring that engine speed gives a P.T.O. speed of 540 r.p.m.
IMPORTANT: Always ensure tractor PTO speed is 540 r.p.m. to give correct rotor speeds.
Ensure the operator is suitably protected – see Page 19 – par. 13
ROTOR ROTATION – DIRECTION
Depending on the type of hedge to be cut, an option of rotation direction is offered. The ‘Upward’ cut is
recommended for trimming grass and light growth such as one/two years’ growth.
For heavier going, such as larger sticks and thick untrimmed hedges, the rotor must be set to cut ‘downwards’.
In order for this downward cut to operate, the front cowl of the Flailhead must be removed.
IMPORTANT For cutting upwards, the cutting head front guard must be FITTED.
For cutting downwards, the cutting head front guard must be REMOVED.
- 21 -