2013 - BOMECON NIJKERK
©
12
4. Maintenance
For a proper maintenance one should carry out the following activities, on a monthly
basis.
•
Control hinge pins and bearing bushes on play and replace parts if required.
•
Control all pivot points.
•
Repair damages in time.
•
Control spring clips, tab hole pins and replace if necessary.
The maintenance activities, mentioned in the operation instructions may only be executed
by expert mechanics.
In view of safety, maintenance activities may not be executed at the Combi-Steker during
hoisting. The Combi-Steker must stand on a fixed basis