BOMANN WA 5721.1, Instruction Manual, Page: 31 / 36

31
Risk of electric shock! Hot steam could damage
the plastic parts. The appliance must be dry be-
fore restarting operation.
CAUTION:

Do not use a wire brush or other sharp, abrasive
items.

Do not use any acidic or abrasive detergents.
NOTE:
Dirty or clogged filter degrades the washing result.
Regularly check the filter and clean them if neces-
sary.
Maintenance of the washing machine

Clean the appliance outer surfaces and the door
sealing thoroughly with a soft, damp cloth. Use
only mild cleaning agent.

Use a dampened cloth with a little white vinegar
or a special detergent for washing machines to
clean the appliance drum.

Recommendation
: allow the appliance to run
regularly without loading in the program [Drum
Clean].

Dry the outer surfaces thoroughly before taking in
operation again.
Cleaning the detergent container

Pull the drawer out until it stops.

Carefully push down the lever (a) in the main
wash chamber and at the same time pull the
drawer completely out.

Wash the chambers thoroughly under running
water. If necessary, use a soft brush.

Insert the detergent container properly.
Cleaning the inlet filter
CAUTION:

Close the water supply before cleaning!

Always check if the water hoses are properly rein-
stalled and no water leaks.
Inlet filter at the tap
Clean the filter when not enough
water is supplied with opened water
valve.

Unscrew the inlet hose from the water valve.

Wash the inlet filter under running water. Recon-
nect the inlet hose firmly.
Inlet filter at the appliance
Clean the filter regularly, approx. every one to three
months.

Unscrew the inlet hose from the appliance back.

Clean the filter with a small brush.

Reconnect the inlet hose firmly
Cleaning the filter of drain pump
CAUTION:
The appliance must never be used without the filter.
The foreign body trap in the drain pump prevents the
flushed parts from closing off the pumping system.
Clean the pump regularly,
approx. once a month;
depending on use.

Open the cover in the base of the unit. Caution!
For this, the use of a tool could be necessary.

Place a drip tray under to catch possible leaking
water.