9
CAUTION
CAUTION
CAUTION
CAUTION::::
•
The feet must never be removed. Do not restrict the floor clearance through ca
pets, strips of wood or similar. Danger of heat accumulation!
Danger of heat accumulation!
Danger of heat accumulation!
Danger of heat accumulation!
Water connection
Water connection
Water connection
Water connection
CAUTION:
CAUTION:
CAUTION:
CAUTION:
•
The Installation of the water supply must conform to the local laws and regulations.
•
The appliance is not
not
not
not suitable for hot water supply.
•
Use the new supplied hose set to connect the appliance to the water supply. Do not
reuse old or used connection sets.
•
If the water pipe is new or long time not used, ensure before connecting to the
water system, that the water is clear and free from contamination.
Notes on inlet h
Notes on inlet h
Notes on inlet h
Notes on inlet hose safety system (not included in delivery)
ose safety system (not included in delivery)
ose safety system (not included in delivery)
ose safety system (not included in delivery)
The safety system consists of a double-walled inlet hose. This system guarantees to cut
off the water supply when leakage of the inner hose. Switching off the water supply
leads over an electronic contact.
If necessary, you can order an inlet hose safety system from your dealer or in our online
accessories shop,
www.bomann.de
www.bomann.de
www.bomann.de
www.bomann.de
. To order, use the reference number found under
“Technical Data”.
Connect the water inlet hose (co
Connect the water inlet hose (co
Connect the water inlet hose (co
Connect the water inlet hose (cold water connection)
ld water connection)
ld water connection)
ld water connection)
NOTE
NOTE
NOTE
NOTE::::
The water pressure must be between 0.05 MPa and 1 MPa. With higher
a pressure regulator.
•
Connect the water inlet hose to a water thread with ¾“.
hose firmly in the direction of the screw thread; pay attention for a
tight fit.
•
Connect the other end of the inlet hose to the inlet valve on the
appliance back; pay attention for a tight fit too.
The feet must never be removed. Do not restrict the floor clearance through car-
The Installation of the water supply must conform to the local laws and regulations.
set to connect the appliance to the water supply. Do not
If the water pipe is new or long time not used, ensure before connecting to the
walled inlet hose. This system guarantees to cut
off the water supply when leakage of the inner hose. Switching off the water supply
If necessary, you can order an inlet hose safety system from your dealer or in our online
. To order, use the reference number found under
and 1 MPa. With higher pressure: use
Connect the water inlet hose to a water thread with ¾“. Screw the
pay attention for a
Connect the other end of the inlet hose to the inlet valve on the
Summary of Contents for WA 5711
Page 27: ...27...