16
Unpacking the Appliance
Unpacking the Appliance
Unpacking the Appliance
Unpacking the Appliance
•
Remove the appliance from its packaging.
•
Remove all packaging material, such as foils, filler
and cardboard packaging.
•
To prevent hazards, check the appliance for any
transport damage.
•
In case of damage, do not put the appliance into
operation. Contact your distributor.
CAUTION:
CAUTION:
CAUTION:
CAUTION:
Pull off the protective foil from the appliance sides.
NOTE
NOTE
NOTE
NOTE::::
Production residue or dust may have collected on the
appliance. We recommend cleaning the appliance
according to chapter “Cleaning and Maintenance”.
Appliance
Appliance
Appliance
Appliance Equipment
Equipment
Equipment
Equipment
Appliance overview
Appliance overview
Appliance overview
Appliance overview
1111
Temperature control /
interior light
2222
Height-adjustable glass
shelves
3333
Door storage racks
4444
Vegetable boxes with
glass shelf
Delivery scope
Delivery scope
Delivery scope
Delivery scope
2 x height-adjustable glass shelf, 2 x vegetable box
with glass cover, 2 x door storage rack (incl. cheese-/
butter case and metal rod for bottle holder), 2 x egg
tray, installation material
Installation
Installation
Installation
Installation
Condit
Condit
Condit
Condition
ion
ion
ions for the installation location
s for the installation location
s for the installation location
s for the installation location
Good ventilation is required around the appliance, in
order to dissipate the heat properly and to guarantee
efficient cooling operation at low power consumption.
Sufficient clearance is necessary.
-
Refer to the instructions which we give you in
“Built-in”;
-
Place the appliance so that the appliance door
can open without being impeded.
•
Only install at a location with an ambient tempera-
ture suitable for the climate class of the appliance.
For information on the climate class, please refer
to chapter “Technical Data” or to the rating label
located in the interior or on the rear side of the
appliance.
•
Look for stable, horizontal appliance position.
•
Avoid the installation:
Avoid the installation:
Avoid the installation:
Avoid the installation:
-
near heaters, next to a stove, direct sunlight or
any other heat sources;
-
at locations with high humidity (e.g. outdoors,
bathroom), as metal parts would be suscepti-
ble to corrosion under such circumstances;
-
near volatile or flammable materials (e.g. gas,
fuel, alcohol, paint, etc.), in rooms which may
have poor air circulation (e.g. garages).
-
Do not expose the appliance any weather.
Electrical connection
Electrical connection
Electrical connection
Electrical connection
WARNING:
WARNING:
WARNING:
WARNING:
•
The installation to the mains supply must conform
to the local standards and regulations.
•
Improper connection may cause to an electric
electric
electric
electric
shock
shock
shock
shock!
•
Do not modify the appliance plug. If the plug does
not fit properly to the outlet, let install a proper
outlet by an authorized specialist.
•
The accessibility of the power plug must be en-
sured to disconnect the appliance from the power
supply in case of emergency.
CAUTION
CAUTION
CAUTION
CAUTION::::
In case of disconnection or power failure:
-
Wait for approx. 5 minutes before restarting.
-
Check the operation settings.
Summary of Contents for VSE 339
Page 23: ...23...