23
Delivery s
Delivery s
Delivery s
Delivery scope
cope
cope
cope
4 x height-adjustable glass shelf, 1 x vegetable box with glass cover, 5 x door storage rack, 2 x egg tray, 1 x
plastic wine rack, 1 x cold storage compartment,
for assembling the door handle:
door handle incl. fixing
screws with covers
Installation
Installation
Installation
Installation
Condition
Condition
Condition
Conditions for the installation location
s for the installation location
s for the installation location
s for the installation location
NOTE
NOTE
NOTE
NOTE::::
The unit has wheels which facilitate the transportation and installation of the appliance. Tilt the device back
slightly and move it gently.
•
Good ventilation is required around the appliance, in order to dissipate the heat properly and to guarantee
efficient cooling operation at low power consumption. Sufficient clearance must be created for this pur-
pose:
-
Gap to the back and to the side walls each approx. 5 cm;
-
Clearance to the front must be created so that the appliance door can open without being impeded.
•
Only install at a location with an ambient temperature suitable for the climate class of the appliance. For
information on the climate class refer to the chapter “Technical Data” or to the rating label located in the in-
terior or at the appliance back.
•
Place the device on a steady and safe surface. If the device is not horizontally leveled, adjust the feet ac-
cordingly.
•
Install the appliance for the wall socket to be freely accessible.
•
Avoid the installation:
Avoid the installation:
Avoid the installation:
Avoid the installation:
-
near heaters, next to a stove, direct sunlight or any other heat sources;
-
at locations with high humidity (e.g. outdoors, bathroom), as metal parts would be susceptible to cor-
rosion under such circumstances;
-
near volatile or flammable materials (e.g. gas, fuel, alcohol, paint, etc.) and in rooms which may have
poor air circulation (e.g. garages).
Assembling the door handle
Assembling the door handle
Assembling the door handle
Assembling the door handle
Lever screw covers on the left side of the door, and then put them back to the plastic bag. Match the handle
on the left side of the door, keeping axes of screw holes in the handle and the door in a line. Fix the handle
with the special screws provided in the plastic bag.
