BOMANN SBS 7324 IX, Instruction Manual

Page: 24 / 28

24
•
Open the unit door only as necessary.
•
The seal of the appliance door must be complete-
ly intact, so that the door closes properly.
Cleaning and Maintenance Cleaning and Maintenance Cleaning and Maintenance Cleaning and Maintenance
WARNING:
WARNING: WARNING:
WARNING:
•
Always disconnect the appliance from the power
supply before cleaning and user maintenance.
•
Do not use steam cleaners for cleaning the appli-
ance; moisture could enter electrical components.
Risk of electric shock!
Risk of electric shock! Risk of electric shock! Risk of electric shock! Hot steam could damage
the plastic parts.
•
The unit must be dry before restarting operation.
CAUT
CAUT CAUT
CAUTION:
ION: ION:
ION:
•
Do not use a wire brush or other sharp, abrasive
items.
•
Do not use any acidic or abrasive detergents.
•
Do not damage the refrigerant circuit.
Cleaning the appliance including interior Cleaning the appliance including interior Cleaning the appliance including interior Cleaning the appliance including interior
•
Clean the appliance interior, the exterior surfaces,
the accessories and the door seal regularly with
warm water and mild detergent; or with a clean,
damp microfiber cloth without cleaning agent.
•
Remove the appliance content and storage it at a
cool location.
•
After everything was thoroughly dried, you can
restart the operation.
Defrosting Defrosting Defrosting Defrosting
The appliance keeps free from ice inside because of
the NoFrost System. A defrosting procedure isn´t
necessary.
Changing the bulb
Changing the bulb Changing the bulb
Changing the bulb
CAUTION: CAUTION: CAUTION: CAUTION:
Do NOT NOT NOT NOT remove the cover of the interior light.
The LED light may be replaced / repaired in case of
failure / defect only by an authorized specialist.
Tro Tro Tro Troubleshooting ubleshooting ubleshooting ubleshooting
Before you contact an authorized specialist Before you contact an authorized specialist Before you contact an authorized specialist Before you contact an authorized specialist
Problem Problem Problem Problem Cause / Action Cause / Action Cause / Action Cause / Action
Unit is not
working
properly or
at all ∙ Check the power supply / tem-
perature setting / ambient temper-
ature. ∙ Unblock the ventilation
openings, install the unit freely.
Loading is
too warm ∙ Check the temperature setting /
ambient temperature. ∙ Open the
door only as long as necessary.
Loud noise
during opera-
tion ∙ Check the appliance position.
∙ See the section “Operating
noise”.
Water on the
unit bottom ∙ Check the temperature setting.
Light does
not work ∙ Check the power supply.
∙ See “Changing the bulb”.
E
EE
Error codes
rror codes rror codes
rror codes
With some malfunctions, the display shows error
codes!
Code Code Code Code C C C Causes auses auses auses
E1 E1 E1 E1 Temperature sensor failure fridge section
E3 E3 E3 E3 Temperature sensor failure freezer section
E4 E4 E4 E4 Defrosting sensor failure
E0 E0 E0 E0 Environment sensor malfunctions
Ec
Ec Ec
Ec Communication sending failure
Er
Er Er
Er Communication receiving failure
F1
F1 F1
F1 Freezer fan motor malfunctions
NOTE: NOTE: NOTE: NOTE:
If a problem persists after following the steps above,
contact your trader or an authorized technician.