BOMANN KGR 7328, Instruction Manual

Page: 19 / 28

19
Electrical connection
Electrical connection Electrical connection
Electrical connection
WARNING:
WARNING: WARNING:
WARNING:
•
The installation to the mains supply must conform
to the local standards and regulations.
•
Improper connection may cause to an eeeelectri lectri lectri lectric c c c
sh sh sh shoc oc oc ockkkk!
•
Do not modify the appliance plug. If the plug does
not fit properly to the outlet, let install a proper
outlet by an authorized specialist.
•
The accessibility of the power plug must be en-
sured to disconnect the appliance from the power
supply in case of emergency.
•
Make sure that the voltage supply matches the
specifications on the rating label before connect-
ing.
•
Connect the mains cable to a properly installed
and earthed wall outlet.
•
If the plug after installation is not accessible, a
corresponding disconnect device must be availa-
ble to meet the relevant safety regulations.
Startup Startup Startup Startup / Opera / Opera / Opera / Operatio tio tio tionnnn
Prior to first use
Prior to first use Prior to first use
Prior to first use
CAUTION CAUTION CAUTION CAUTION::::
After transport, the appliance should be left standing
upright for about four hours before connecting to the
power supply. Nonobservance could lead to malfunc-
tion of the cooling system and causes an appliance
breakdown.
Clean the appliance interior including all accessory
parts. Consider the instructions which we provide in
the chapter
“Cleaning and Maintenance” .
Sta
Sta Sta
Starting the appliance
rting the appliance rting the appliance
rting the appliance
•
Connect the appliance to the power supply.
•
Operate the temperature control. See also the
section
"Settings"
.
Sett
Sett Sett
Settings
ings ings
ings
Setting [ 0 ] means that the appliance is in the off
state. Turn the temperature control clockwise, start-
ing from this setting; the appliance will turn on auto-
matically.
The power levels [ 1 – 5 ] regulate the different val-
ues of the internal temperature.
Set
Set Set
Setting
ting ting
ting 0000:::: Off sate
Set
Set Set
Setting
ting ting
ting 1:
1: 1:
1: Lowest setting (warmest inside temp.)
SSSSettin ettin ettin etting g g g 5555:::: Highest setting (coldest inside temp.)
The temperature of the freezer is automatically con-
trolled by the power level setting in the fridge.
Note that the temperature will change depending on
the ambient temperature, frequency of door opening
and the amount of food in the appliance.
During initial operation, turn the power level to the
highest level first, until the appliance has reached the
desired operating temperature. Afterwards it is rec-
ommended to turn the control back to a medium set-
ting; correcting the temperature at a later point would
then be easier.
Interior Interior Interior Interior light light light light
When opening the fridge door, the interior light will
turn on automatically.
Sto Sto Sto Storing food ring food ring food ring food
NOTE: NOTE: NOTE: NOTE: Recomm Recomm Recomm Recommendation! endation! endation! endation!
To guarantee that the temperature is low enough,
you should pre-cool the appliance a few times before
initial loading foods.
CA CA CA CAUTION: UTION: UTION: UTION:
Always pay attention to the storage instructions on
the sales packaging.